Battery-free operation
Can operate without a battery under a suitable power configuration.
Solar inverters
12 kW off-grid solar inverter
A single-phase SmartInver for solar generation and backup. Supports lithium and lead-acid batteries, battery-free operation and parallel expansion.
MesPal
Factory-stated use cases and system strengths from the product brochure.
Can operate without a battery under a suitable power configuration.
Up to nine inverters in a parallel system.
CAN and RS485 for a compatible battery.
Utility input and solar generation supply local loads.
MPPT tracking range 100–450 V DC.
Supports 48 V lead-acid and 51.2 V lithium batteries.
MesPal
Key factory specifications from the manufacturer’s brochure.
| Rated output power | 12000 W |
|---|---|
| Rated apparent power | 12000 VA |
| AC output voltage | 220 / 230 / 240 V AC ±5% |
| Rated frequency | 50 / 60 Hz ±1% |
| Surge power | 24000 VA |
| Maximum efficiency | 94 % |
| Overload capability | ≥150% for 5 s; 110–150% for 10 s |
| Transfer time | 10 ms (UPS); 20 ms (Appliances) |
| Operating modes | Off-grid with utility input; no grid export |
| Parallel operation | Up to 9 units |
| Nominal voltage | 230 V AC |
|---|---|
| Grid voltage range | 170–280 V (UPS); 90–280 V (Appliances) |
| AC frequency range | 40–65 Hz |
| Maximum bypass current | 70 A |
| Maximum AC charging current | 120 A |
| Nominal battery voltage | 48 V DC (lead-acid); 51.2 V DC (lithium) |
|---|---|
| Combined AC + PV charging current | 200 A |
| Maximum discharging current | 215 A |
| Maximum PV voltage | 500 V DC |
|---|---|
| Maximum PV power | 2 × 6000 W |
| MPPT voltage range | 100–450 V DC |
| Maximum PV input current | 23 + 23 A |
| Maximum PV charging current | 200 A |
| Ingress protection | IP54 |
|---|---|
| Dimensions | 660 × 505 × 136 mm |
| Net weight | 24.5 kg |
| Noise level | ≤60 dB |
| Relative humidity | 5–95%, non-condensing |
| Storage temperature | −15…+60 °C |
| Operating temperature | −10…+55 °C; derating above +45 °C |
| Installation altitude | Up to 4000 m; derating above 3000 m |
| Communication interfaces | RS485 / CAN / dry contact |
| Package dimensions | 750 × 595 × 244 mm |
| Manufacturer warranty | 2.5 years, per manufacturer catalogue |
The inverter supplies local loads from PV, battery or AC. This is an off-grid model with utility input, not a grid-export inverter. Battery settings, source priority and parallel configuration must be agreed during design. Wi-Fi requires a compatible external adapter.
Start with a consultation
Describe your task. We will respond within 24 hours with practical next steps.