Accessories

MesPal NK-BMS-16S100A-02

Name: MesPal NK-BMS-16S100A-02
Brand: MesPal

16S / 100 A low-voltage BMS

A BMS board for residential LFP storage: 100 A continuous current, 80 mA passive balancing, eight temperature sensors and CAN/RS485.

Battery configuration16S

Continuous charge / discharge current100 A

Supply voltage16–65 V

Balancing80 mA

Request a quote Datasheet (PDF)MesPal 2026 catalogue (PDF)

MesPal

Technical specifications

Key factory specifications from the manufacturer’s brochure.

Measurement and balancing

Battery configuration	16S
Cell voltage measurement range	1–5 V at −10…+50 °C
Voltage measurement accuracy	±5 mV
Cell voltage sampling interval	≤100 ms
Balancing	Passive, up to 80 mA
Temperature measurement range	−50…+125 °C
Temperature accuracy	≤±2 °C (NTC)
Temperature sampling interval	≤1000 ms
Temperature channels	8
Current measurement range	−200…+200 A
Current measurement accuracy	≤±0.5 A within −30…+30 A; ≤±1 A outside that range
Current sampling interval	≤250 ms
Battery voltage measurement range	16–65 V
Pack voltage sampling interval	≤100 ms
Pack voltage accuracy	<1% FSR

Supply, management and communication

Supply voltage	16–65 V
Standby current consumption	<400 µA
Operating current consumption	<55 mA
Activation	Power-on or charging activation
Inverter charging activation	30–65 V
Continuous charge / discharge current	100 A; temperature rise ≤70 °C at 25 °C ambient
Parallel operation	Up to 16 groups
Communication interfaces	2 × RS485; 1 × CAN; dry contact
Circuit breaker detection	Not provided

Construction and operation

Operating temperature	−30…+60 °C
Storage temperature	−30…+85 °C
Relative humidity	5–90%, non-condensing

Vezemo verified

Sourcing and delivery under one contract

The BMS monitors cell voltage, current and temperature, estimates SOC/SOH and manages battery protection. It provides configurable current thresholds, sleep/wake modes, status indication and LCD interface. The board requires professional integration; cell compatibility, thermal behaviour and inverter protocol must be validated in the complete system.